![]() For instance, the loopback address of R3 is 1.1.1.3/32.Īlso, each subnet between the routers is written on the topology and every router uses the last octet as its router number. The default gateway of the PC is the router’s IP address.įor instance, on the subnet with PC_2, PC_2 has the IP address of 10.10.20.100/24 and R3’s interface IP address is 10.10.20.1/24.Įach router has a loopback address in the form of 1.1.1.X/32, where X is the router number. 1 and last octet of the PC’s IP address is. Regarding the topology, on the subnets where a PC/SERVER is connected, the router’s interface has an IP address whose last octet is. ![]() ![]() Configuring_zbpf_final.pkt is the final configuration you should use this to compare what you configured and confirm that you did everything correctly. ![]()
0 Comments
Leave a Reply. |